This machine seals the edges of a pleat pack thermo-electro-pneumatically after PVC based adhesive is applied over the edge. After the adhesive is applied in between the two edges of the pleat pack, it is put in between the two pressing bars both of which are heated through electrical heaters. The edges get sealed when the top bar presses against it through pneumatic force.

The salient features of this machine are:

• Movement of the top Pressing Bar is through Pneumatic Cylinders
• Bottom Pressing Bar is fixed and insulated to prevent heat loss.
• Pneumatic system is complete with all the regulating arrangements like Pressure Regulator, Pressure Gauge, Safety Valve, FRL unit with Air Release Valve etc.
• Provided with Pre-set Timer and Buzzer to indicate the completion of heating/pressing cycle.
• Provided with auto cut-off system to stop the machine on reaching the heating/pressing cycle.
• Provided with Digital Temperature Display and Controller.
• Top Plate can be retracted manually with pneumatically operated Foot Valve or it can be retracted  automatically on completion of heating cycle through PLC based control system
• Standard table size is 650mm (L) x 600mm (W) x 800mm (H). However this size can vary based on customer requirement.
• Utilizes heat load of up to 3 KW.